Golf GLS L4-2.0L (AEG) (2001)
See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Reading Diagnostic Trouble Codes
See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Clearing Diagnostic Trouble Codes
-
Display readiness code. See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
If DTC memory has been erased or the Engine Control Module (ECM) was disconnected from permanent battery (B+) voltage, generate the
readiness code again. See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
Evaluating display group 004, display field 3 - Coolant temperature
Display Group 4, Display Field 3
Continuation of check when display approx. -46°C:
-
Disconnect 4-pin harness connector from Engine Coolant Temperature (ECT) sensor -G62- with Engine Coolant Temperature (ECT) sensor -G2-
(arrow).