Golf GLS L4-2.0L (AEG) (2001)
-
Remove bolts -1- and -2-.
-
Support sub-frame with engine/transmission jack VAG 1 383A.
-
Remove bolts -1-.
-
Remove bolts -2- and -3-.
-
Lower sub-frame with engine/transmission jack VAG 1 383A.
-
Remove return line clamp -1- and unscrew line fitting at steering gear -2-.
-
Remove power steering gear bolts.
-
Take power steering gear out to rear.
Installing
NOTE:
^
Use new O-rings for hose line connections.
^
Coat O-rings with lubricant before installing steering gear.
^
After connecting steering gear to universal joint shaft ensure seal lies against assembly plate without kinking and opening to footwell is correctly
sealed. Otherwise noises or water leaks may be develop later.