Golf GLS L4-2.0L (AEG) (2001)
-
Unclip brake cable (arrows).
-
Remove clips -2- both sides.
-
Remove bolts -1- on rear axle bearing bracket, both sides.
-
Position a wooden block approx. 100 mm (3.34 in.) long between rear axle and body.
-
Position VW 771 slide hammer and pull out bonded rubber bushing
Installing
Bonded rubber bushing has mark -1- on face.
Mark must align with edge (arrow) on trailing arm -2-.
-
Mark position of mark -1- on bonded rubber bushing.