Golf GLS L4-2.0L (AEG) (2001)
Axle Beam: Service and Repair
Rear Axle Beam, Assembly Overview (FWD)
Rear axle beam, assembly overview
Note: Welding and straightening on axle beam and stub axle is not permitted.
1. Axle beam
^
Stub axle contact surfaces and threaded holes are to be free of paint and dirt
2. Spacer bushing
^
Material: Zinc
^
Check bushing for damage
3. Coil spring
^
Application; Refer to Parts Supplier
4. Spring seat
5. Hex bolt
6. Shock absorber
^
Functional check - Item -1 -
7. Hex bolt
^
40 Nm (30 ft. lbs.) plus an additional 90° - 1/4 turn
^
Always replace
8. Hex nut
^
Always replace
^
The axle beam must be in the middle position when tightening the nut
^
We recommend that the rear of the vehicle be loaded with the weight of one person when tightening
9. Hex socket head bolt, 8 Nm (70 inch lbs.)
10. Speed sensor
11. Stub axle
^
Straightening operations are not allowed!
^
Recutting the thread is not allowed!
12. Stone protection plate
13. Phillips head screw, 4 Nm (35 inch lbs.)