Golf GLS L4-2.0L (AEG) (2001)
Tip: To aid in demonstrating procedure, illustrations show carrier removed from vehicle.
^
Remove cables from pulleys to regulator only) using appropriate removal tool at both tracks DO NOT cut cables.
^
Leave single cable (arrows) attached (cable is not replaced).
^
Move window clamps to top of carrier (clamps must be at top of carrier to be removed).
Window clamp, removing from track
With clamps at top of carrier:
^
Flip window clamp up (arrow) and remove from track as shown (noting cable placement).
^
Disengage cable crimped ends from window clamp.
If replacing clamps only, see "Window clamp, installing on track".
^
Remove regulator assembly (see "Regulator, removing from carrier assembly").
^
Single cable remains in installed position.
Regulator, removing from carrier assembly
On opposite side of carrier:
^
Using a small flat blade screw driver to press lock tabs on three mounting pins (arrows) inward while applying downward pressure to regulator
with finger (as shown).