Golf GLS L4-2.0L (AVH) (2002)
/Page-1531006.png)
-
After each brake pad change, firmly depress brake pedal several times with vehicle stationary, so that the brake pads are properly seated in
their normal operating position.
-
After changing brake pads check brake fluid level.
Rear Brake Pads, Removing and Installing
Brake pads, removing and installing
Special tools and equipment
^
3272 Resetting and removal tool
^
VAG 1331 Torque wrench or equivalent
Note: Mark brake pads when removing if they are to be reused. Re-stall in their original position to prevent uneven braking!
Removing
-
Remove wheels.
-
Remove clip - 1 -.
-
Press brake lever - 2 - in direction of arrow and unhook brake cable - 3 -.
-
Take parking brake cable out of brake caliper mounting.
