volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Seals and Gaskets, Engine > < Oil Level Warning Indicator|Description and Operation
Page 1
background image

Oil Level Warning Indicator: Testing and Inspection

Oil pressure warning light, checking

After switching ON the ignition (engine not running), the oil pressure warning light (K3) must stay ON for approx. 3 seconds and then switch OFF.

Note:

-

The check will be aborted if the engine is running.

Warning criteria

Optical oil pressure warning (oil pressure warning light flashes) and the 3 time buzzer for acoustic warning, will switch ON under the following
conditions:

^

Ignition switched ON (engine NOT running) = Oil pressure switch CLOSED

^

Engine RPM greater than 1500 rpm = Oil pressure switch OPEN

^

At engine speeds greater than 5000 rpm, the oil pressure warning is not cancelled, even if the oil pressure switch is closed. Oil pressure warning
only cancels below 5000 rpm.

^

If the oil pressure switch is opened at an engine speed greater than 1500 rpm for anywhere from 0.5 to 3 seconds, it is stored in the instrument
Page 1 Control Module. If this condition occurs 3 times during engine running, an oil pressure warning is immediately activated and since it is
under 1500 rpm will not be erased. Oil pressure warning cancellation occurs when the oil pressure switch "over 1500 rpm" is closed for longer
than 5 seconds or with the ignition switched OFF.

Seals and Gaskets, Engine > < Oil Level Warning Indicator|Description and Operation