Golf GLS L4-2.0L (AZG) (2001)
^
Screw piston into housing by turning knurled wheel clockwise.
Notes:
^
Install special tool 3272 with the collar (arrow) seated on the brake caliper.
^
If the piston is difficult to move, use a 13 mm open end wrench on the flats (arrow -A-) provided for this purpose.
^
If the piston is pushed back with a piston re-seeing tool or by operating the foot brake, the automatic adjustment in the brake caliper is
destroyed.
^
Install brake pads.
Pre-bleeding brake caliper
^
Position brake caliper as shown in illustration.
^
Open bleeder valve (arrow -A-) and fill a standard bleeder bottle with brake fluid until bubble-free brake fluid flows from brake hose connection
(arrow-B-).
^
Close bleeder valve.