Golf GLS L4-2.0L (AZG) (2001)
Air Door Actuator / Motor: Service and Repair
Temperature Flap Motor -V68-, Removing and Installing
Temperature flap motor -V68-, removing and installing
First do the following:
-
Remove glove box.
-
Remove trim under steering column.
-
Remove center console.
Removing
-
Disconnect electrical connector -1-.
-
With screwdriver, carefully unclip operating rod -2- from lever -arrow A-.
-
Remove screws -4-.
-
Remove flap motor -3-.
Installing and adjusting
-
Initiate Basic setting, function 04 See Climatronic, OBD.