Golf GLS L4-2.0L (AZG) (2001)
Rear Door Exterior Handle: Service and Repair
Door Handle, Removing and Installing
Door Handle, Removing And Installing
Removing
-
Pull off door seal - 1 - in area of door handle.
-
Pull door handle - 2 - in direction of - arrow - and hold in this position. Remove bolt - 4 - up to stop using Socket wrench T10011 (T10072).
Housing is loosened by doing so.
NOTE: If bolt has been loosened too far, this may cause lock mechanism ring to loosen from mounting bracket and fall into door.
-
Remove housing - 3 - at right angle to door from door handle mounting bracket.
-
Unclip clip - 1 - from door handle.
-
Swivel out door handle from door.
Installing