Golf GTI L4-1781cc 1.8L SOHC (HT) (1985)
-
Removing tapered roller bearing inner race
^
Place 3002 pressure piece on differential housing before assembling extraction tool
NOTE:
-
The procedure for removing the inner races of tapered roller bearings of differential housing is the same on both sides.
-
The tapered roller bearings are destroyed during removal.
-
Pressing on inner race of tapered roller bearing for differential housing
^
Preheat inner race to approx. 100°C (212°F) and install
NOTE: When using the VW455 thrust tube, the recessed side faces the tapered roller bearing.
12
Tapered roller bearing outer race