Golf GTI L4-1984cc 2.0L DOHC (9A) (1990)
engine condition.
7.
Remove the cold start injector and hold it in a fuel safe measuring container.
8.
Activate the starter.
^
The cold start valve must spray in pulses for approx. 8 seconds in a uniform cone pattern.
9.
Dry off the injector nozzle.
10.
Observe the nozzle for one minute.
^
No drops may fall from the nozzle within one minute and the nozzle must remain dry.
If the correct results are not obtained, replace the cold start valve.