Golf GTI L4-2.0L (ABA) (1997)
-
Remove battery tray.
Locate ground studs -A-.
-
Check ground connections at studs, terminals must be:
^
Tight
^
Free of corrosion
^
Securely crimped to wires
If terminals are loose on the stud:
-
Torque cap nut to 7.5 Nm (66 in. lb).
Check that terminals are tight.
-
Reinstall battery tray.
-
Reinstall battery.
-
Re-connect battery positive (B+) cable.
-
Re-connect battery ground cable.
-
Re-code radio and re-program customers preset radio stations.
-
Connect VAG 1551 and erase any stored Diagnostic Trouble Codes.
When procedure applies to vehicles within warranty use the following:
Part Identifier:
9798
Labor Operation: 9798510 35TU