Golf GTI L4-2.0L (ABA) (1997)
/Page-1028003.png)
-
Lower fuse relay panel.
-
Remove body plug (approx. 4O mm) located near brake booster (arrow).
-
Insert harness (with fuse, black and brown connectors) through body panel to inside of vehicle.
-
Fully seat grommet into body panel.
-
Route brown connector behind fuse/relay panel bracket and insert into center ring of brown ground lug (arrow) at A-pillar.
-
Connect fused black connector to open terminal in black 4 point TV block located above fuse relay panel or clipped to steering column bracket.
