volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Air Flow Meter/Sensor|Specifications > < Engine Controls - Silicone Sealer/Lubricant Precautions|Page 3701
Page 4
background image

Note:

If black 4 point TV block has no open terminal replace with Part No. 3A0 937 517 (8 point TV block).

When connected, relay should activate with ignition key in the ON position only.

-

Reinstall fuse/relay panel and lower panel.

-

Route harness with existing engine compartment harness to right side of vehicle behind blackplastic harness cover (arrows).

-

Plug connector into resistor for newly installed valve and tie-wrap harness as shown

-

Connect Battery Ground (GND) Strap.

-

Code radio.

-

Reprogram customer's preset radio stations.

Air Flow Meter/Sensor|Specifications > < Engine Controls - Silicone Sealer/Lubricant Precautions|Page 3701