Golf GTI L4-2.0L (ABA) (1997)
-
Checking Load Registration Specifications 2 (display Field 3):
Evaluating Display Group 016: Display Field 3
Checking Voltage Supply
-
Disconnect 4-pin connector from Mass Air Flow sensor.
-
Connect multimeter with test leads from VW 1594 to measure voltage at terminals 1 and 3.
Specification: 9.0-14.5 volts
If no voltage is present:
-
Switch ignition off.
-
Check wiring according to wiring diagram.
Checking wiring
-
Switch ignition off.
-
Connect VAG 1598/18 test box to ECM wiring harness.