Golf GTI L4-2.0L (ABA) (1997)
Relevance Of Values In 8-digit Number Block.
Continuation
-
Separate 4-pin connector -2- (brown) to HO2S 2 -G 108- (after three way catalytic converter).
-
Connect multimeter with test leads from VW 1594 to measure resistance at terminals 1 and 2 on connector to HO2S 2.
-
Measure the resistance value.
Specification: 0.00-24.2 ohms
If The Specification Is Not Obtained:
-
Replace HO2S 2 -G108- (after three way catalytic converter).
If The Specification Is Attained:
-
Check relevance table, for value of O2S control status, display group 121, display field 4, 1st position from left.
-
Set multimeter voltage measurement range.
-
Connect multimeter with test leads from VW 1594 to measure voltage between terminals 1 and 2 (ECM side of harness connector).