Golf GTI L4-2.0L (ABA) (1997)
-
Terminal 1 and test box socket 34
-
Terminal 2 and test box socket 33
-
Terminal 3 and test box socket 56
Resistance: Max. 1.5 ohms
-
Additionally check wires for short to one another.
-
Terminal 3 and test box socket 34
-
Terminal 3 and test box socket 33
-
Terminal 2 and test box socket 34
Specification: Infinite ohms
If no wiring malfunction is detected:
-
Loosen knock sensor and tighten again to 20 Nm (15 ft lb).
If the malfunction is still present (malfunction again in Diagnostic Trouble Code memory):
-
Replace Knock Sensor 1 -G61-.
-
Read the readiness code.If DTC memory has been erased, repair must be verified via appropriate display group: Readiness code, creating.