Golf GTI L4-2.0L (ABA) (1997)
9 - Airbag Spiral Spring -F138
Removing
-
Disconnect battery Ground (GND) strap.
-
Turn steering wheel -1- to center position (wheels in straight-ahead position).
-
Remove socket-head bolts -5- : Torque 6.5 Nm (58 in lb).
-
Remove airbag unit -3- from steering wheel and disconnect red connector -2- from airbag unit.
Installing
-
Install in reverse order of removal.
-
Tightening torque (bolts -5-): 6.5 Nm (58 in lb)
WARNINGMake sure that no person is in the vehicle when reconnecting the Ground (GND) strap.
After all driver's side airbag components are installed:
-
Switch ignition ON.
-
Connect battery Ground (GND) strap (-).
Removal and Installation
Passenger's Side Airbag
1 - Hex bolt
2 - Cover
3 - Retaining frame
4 - Hex bolt - Torque to: 6.5 Nm (58 in lb)
5 - Airbag unit connector
6 - Air vent
7 - Air venting housing
8 - Passenger's side airbag unit
9 - Guide pin
Removal:
CAUTION: On vehicles equipped with an anti-theft radio, make sure that you have the correct radio activation code before disconnecting the
battery.
-
Disconnect Battery Ground (GND) strap (-).