Golf GTI V6-2792cc 2.8L DOHC (AAA) SFI (1998)
Front Bumper: Service and Repair
Front Bumper, Removing and Installing
1
- Hex-head screw (four)
‹› 0 Nm (7 ft lb)
2
- Carrier
3
- Plastic foam
4
- Plastic insulator
5
- Guide
‹› Remove or install cover -8- by pulling out of or pushing into both guides (left and right) in parallel.
6
- Front side marker light -M11-
7
- Spreader rivet
‹› Connects cover to wheel housing liner.
8
- Cover
‹› Material: PPIEPDM
9
- Hex-head screw
‹› Qty: 8
‹› 23-25 Nm (17-18 ft lb)
10
- Hex-head screw
‹› Oty: 4
‹› 30 Nm (22 ft lb)
11
- Hex-head screw
‹› Qty: 2
‹› 5 Nm (44 in lb)