Golf GTI V6-2792cc 2.8L DOHC (AAA) SFI (1998)
Fuel Gauge Sender: Testing and Inspection
Fuel Level Sensor (G) With Adjusting Screw
Test conditions:
-
Position of fuel level sensor OK.
-
Switch off ignition
-
Disconnect connector from fuel level sensor (G).
-
Adjust multimeter Fluke 83 (US 1119) to Ohm range and connect to fuel level sensor contacts.
-
Drain fuel tank completely, using fuel storage cart Tempo Products FM 3000 or equivalent. Observe Warning on front page.
-
Fill fuel tank with 7 liters (7.4 quarts) of fuel and check sensor resistance.
-
must be 189 ohms ± 4 Ohms