Golf GTI V6-2792cc 28L DOHC (AAA) SFI (1998) Front Final Drive Specifications
(19) Spring pin -- for securing differential pinion shaft
Removing Spring Pin For Differential Pinion Shaft
-
Cover tapered roller bearing inner race and speedometer drive gear to avoid possible damage from metal particles
-
Knock-out spring pin with chisel, inserting chisel into circumferential groove
Installing Spring Pin For Differential Pinion Shaft
-
Drive fully into the differential housing
(20) Tapered roller bearing inner race
Pulling Off Tapered Roller Bearing Inner Race
-
Before fitting the extractor, position press tool 40-105 on differential housing
NOTE: The set-up and procedure for pulling tapered roller bearing inner races off the differential housing is identical for both bearings.
Pressing On Tapered Roller Bearing Inner Race
NOTE: The tapered roller bearing inner races for transmission housing and clutch housing are pressed on with the same press tools.
(21) Tapered roller bearing outer race