Golf GTI V6-2792cc 2.8L DOHC (AAA) SFI (1998)
Installation Position Of Spring In 5th Gear Operating Sleeve
-
Press operating sleeve onto synchro-hub
^
Pointed teeth (A) and shoulder (B) on synchro-hub face same direction
^
Recesses for locking pieces, in synchro-hub and in operating sleeve, must be aligned
^
Install locking pieces
^
Install springs under lugs (C), offset by 120°, under stops (C)
^
Spring must act on all three locking pieces
^
Position angled ends directly behind two locking pieces (arrows)
(18) Lock pieces -- quantity: 3
Installation Position
-
Lock pieces = (B)
(19) 5th Gear synchronizer hub (synchro-hub)
-
Disassembly/Assembly -- Ref Manual Transmission, See: Service and Repair
(20) 5th gear operating sleeve
-
Disassembly/Assembly -- Ref Manual Transmission, See: Service and Repair