Golf III L4-1984cc 2.0L SOHC (1993)
Dimmer Switch: Service and Repair
1.
Disable airbag system, refer to MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
Disconnect battery ground cable.
3.
Remove steering wheel, refer to Steering and Suspension/Steering/Steering Wheel/Service and Repair.
4.
Remove lower and upper trim cover attaching screws and trim covers, if necessary.
5.
Remove three attaching screws, then detach switch unit from steering column.
6.
Disconnect multi-pin connector, then remove switch unit.
7.
Reverse procedure to install, noting the following:
a. Lubricate turn signal cancelling ring with multi-purpose grease.
