Golf III L4-1984cc 2.0L SOHC (1993)
Electronic Brake Control Module: Service and Repair
Control Module, Removing And Installing
Location:
-
Up to 01.93 In left front footwell under floor covering in front of passenger seat.
-
From 01.93 under rear seat, right side.
NOTE: Switch off ignition before disconnecting and connecting connectors.
Removing
-
Fold up rear seat.
-
Press control module securing clips together and pull out.
-
To pull connector off control module, release control module locking bar.
Installation
-
Install in reverse order.
-
Engage connector catch in control module slots (arrow A), press connector on (arrow B) and secure with locking bar (arrow C).
