volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Airbag Control Module - Removing and Installing|Page 405 > < Airbag Control Module - Removing and Installing
Page 1
background image

Air Bag Control Module: Technical Service Bulletins
Air Bag ECM - Recoding Procedure

GROUP: 68

NUMBER: 94-09

DATE: Nov. 9, 1994

SUBJECT: 
Air Bag Electronic Control Module, Supersession

MODEL(s): 
Golf III, Jetta III, w/Airbag All m.y.

File this Technical Bulletin In Repair Manual No.: W42 011 294 114

Condition

The Airbag Malfunction Indicator Light (MIL) remains on after installation of the superseded Airbag control module

Part Number: 701 909 603 D

Caution

Part numbers are for reference only. Always check with our Parts Department for the latest parts information.

Service

^

In order to code the Airbag Control Module, your Dealer number must be present in the 1551 Scan tool.

-

Connect the VAG 1551 Scan Tool per instructions on page 01-5 of the Repair Manual Golf III, GTI, Jetta III, Cabrio Body-Exterior Body Interior.

Display will appear as shown except, Operating modes 1 and 2 are displayed alternately.

-

Input mode 4 then push Q button.

Display will appear as shown.

-

Push HELP button for instructions for entering Dealership number or:

-

Enter 1 to display Dealer code.

-

Enter 2 to delete Dealer code.

-

Enter 3 to input Dealer code.

-

Follow instructions listed on page 01-6 to display the part number of the Airbag Control Module.

^

Display will appear as shown.

Airbag Control Module - Removing and Installing|Page 405 > < Airbag Control Module - Removing and Installing