Golf III L4-1984cc 2.0L SOHC (1993)
2. Install new self-locking nut, and counterhold with hex key (6 mm).
1 - Hex key (6 mm), shortened by approx. 10 mm (3/8 inch)
2 - Box wrench (19 mm), insert or slotted box wrench insert
3 - Torque wrench
3. Secure ball joint to control arm (bolts on old marks).
NOTE: Check that boot is not damaged or twisted.
4. Tighten ball joint to wheel bearing housing to: 45 Nm (33 ft. lbs.)
5. Tighten ball joint to control arm to: 35 Nm (26 ft. lbs.)
