Golf III L4-1984cc 2.0L SOHC (1993)
Fig. 9 - Boot Clamps, Tensioning
CAUTION:
-
Clamp can only be tensioned using tensioning pliers.
-
Ensure that jaws of pliers contact the corners of the clamp arrow -B-.
-
Tension clamp by turning spindle to torque of 25 Nm (18 ft. lbs.).
NOTE: Coat the threads of the tool spindle with MoS2 grease to ensure smooth operation.
Fig. 10 - Axle Shaft, Length
-
Dimension a: 020 transmission:
-
left = 455.5 mm (17.933 inch)
-
right = 691.5 mm (27.224 inch)
-
096 and 02A transmission
-
left = 447.4 mm (17.614 inch)
-
right = 681.5 mm (26.831 inch)
Axles With Triple Rotor (Tripod) Type Inner Joint
NOTE: Directly below the component legend are the Fig. numbers. Please refer to these for information regarding removal and installation instructions.
1- Outer constant velocity (CV) joint
