Golf III L4-1984cc 2.0L SOHC (1993)
Rear Door Window Regulator: Service and Repair
Regulator Removal/Installation
-
Remove Door Window.
-
Remove cable clip (arrow).
-
Loosen hex-head screws -1- and -2-.
-
Lift window regulator slightly so that hex-head screws -1- can be pulled through installation openings.
-
Pull window regulator out downward through installation opening.
-
Install in reverse order of removal.
-
Tightening torque (screws -2-): 10 Nm (7 ft lb)
