Golf III L4-2.0L (ABA) (1995)
/Page-572006.png)
- Measure in direction -A- perpendicular to crankshaft, and direction -B- parallel to crankshaft.
- Measure at -1- 10 mm (0.039 in.) from top, -2- (center) and -3- 10 mm (0.039 in.) from bottom.
-
Use 50-100 mm internal micrometer.
-
Maximum deviation from nominal diameter; 0.08 mm (0.0015 in.)
CAUTION!
-
DO NOT measure cylinder bore when cylinder block is mounted in VW540 holding fixture. Measurement accuracy can be affected by cylinder
block distortion as it hangs down from the engine stand.
Piston and cylinder dimensions 07.95 1)
1) Flat top Piston with center combustion chamber recess
Piston and cylinder dimensions 08.95-07.96 1)
