Golf III L4-2.0L (ABA) (1995)
/Page-2574002.png)
-
Remove eight screws retaining instrument cluster to housing (arrows).
-
Slide instrument cluster out of original housing, and into new housing.
-
Reinstall eight retaining screws.
-
Transfer both illumination bulb holders, with bulbs, from original housing into new housing.
-
Reinstall instrument cluster assembly.
-
Reconnect battery ground (GND) strap.
-
Re-code radio.
When procedure applies to vehicles within the New Vehicle Limited Warranty use the following:
Part Identifier:
9025
Labor Operation: 9025510
60 TU
