Golf III L4-2.0L (ABA) (1995)
Headlamp Bulb: Service and Repair
Single Bulb Headlights
NOTE: Check and adjust headlights after performing any work that may affect headlight aim.
Removing and Installing Headlight Bulb :
Removing:
-
Remove tie-wrap (if installed) from headlight connector.
-
Remove headlight connector.
-
Twist bulb holder lock ring counter-clockwise approx. 1/4 turn and remove.
-
Pull bulb holder from headlight housing and remove bulb from socket.
Installing:
NOTE: Do not touch bulb glass with bare fingers. Skin oil will evaporate when bulb gets hot, dulling reflector and/or damaging bulb.
-
Insert new bulb into holder.
-
Align lugs on bulb holder with grooves in reflector housing and install holder into housing.
-
Install bulb holder lock ring and twist 1/4 turn clockwise to lock.
-
Install headlight connector and new tie-wrap.
-
Check headlight aim.