Golf III L4-2.0L (ABA) (1995)
/Page-1414001.png)
Ignition Coil: Testing and Inspection
CHECKING IGNITION COIL
-
Disconnect harness connector and ignition wire from Ignition Coil (N152).
-
Check primary resistance between terminals -1- and -15- using Fluke 83 multimeter.
^
Specified value: 0.5 - 0.7 Ohms.
-
Check secondary resistance between terminals -4- and -15-.
^
Specified value: 3000 to 4000 Ohms.
-
If NOT OK:
-
Remove Ignition Coil and disconnect Ignition Coil Power Output Stage (N157).
-
Repeat test.