volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Alignment - Conversion Chart for Specifications|Page 7527 > < Alignment - Conversion Chart for Specifications|Page 7525
Page 8
background image

R.O. when submitting warranty claim.

- Road test vehicle and verify complaint

- Check and correct front and rear wheel alignment according to specifications.

- Use only optical wheel alignment equipment

Wheel alignment checking requirements

- Check that vehicle is NOT equipped with unidirectional tires (designed to run in one direction only)

- Ensure alignment equipment is properly calibrated

- Ensure vehicle is at curb weight (fuel tank full, spare tire and jack in place)

- Check tire pressures and adjust as necessary according to tire inflation specification label on car

- Position car properly on alignment equipment and bounce suspension several times

- Check steering, steering linkage and suspension for excessive play and/or damage, repair as necessary

Technical Service Bulletin # 449403

Date: 940801

Wheels/Tires - Vibrations

Group: 44

Number: 94-03

Date: Aug, 1, 1994

Subject: 
Wheels/Tires, Eliminating Vibrations

Model(s): All

All m.y.

Wheel imbalance generates dynamic forces that can cause vehicle components such as steering gear, wheel suspension units, and body to resonate. This
in turn, leads to vibrations of the steering gear and the vehicle itself.

Before making any repairs:

- Check tire pressures and correct if necessary

- Road test vehicle to determine the type of condition (steering wheel wobble and affected speed range) so a comparison check can be made later to

prove repairs have been successful.

Note:

Vibration can fluctuate as left and right tires phase in and out

- Check that surfaces of tires are free of damage such as scuffing and flat areas.

- Check that suspension components are not damaged or worn.

Note:

If a component is replaced, check and align front suspension as necessary

- Clean wheels and tires of accumulated mud or dirt

Caution!

Even a small amount of imbalance in the wheels can lead to steering wobble. Great care must be taken with all operations dealing with the
elimination of imbalance.

Work Sequence

Alignment - Conversion Chart for Specifications|Page 7527 > < Alignment - Conversion Chart for Specifications|Page 7525