Golf III L4-2.0L (ABA) (1995)
Plug material change from brown to white (also --> Illustration 38-A011) beginning transmission build date 20125 (20 Dec. 95).
Service
If condition exists:
-
Obtain repair kit Part No. 01M 398 998, ATF screen gasket and ATF pan gasket.
-
Drain ATF, remove ATF oil pan and ATF screen (see appropriate Repair Manual for Models listed).
Using an angled Torx T20 driver -A- --> Illust. 38-A011 (commercially available):
-
Remove valve body plug (turn counterclockwise to remove) for limit selector (arrow -1-) and install white plug from repair kit.
^
Plug-1-is secured by turning clockwise 1/4 turn.
-
Remove valve body plug (turn clockwise to remove) for manual 1 selector (arrow -2-) and install white plug from repair kit.
^
Plug -2- is secured by turning counterclockwise 1/4 turn.
Note:
Replace plugs one at a time (ensures that springs behind plugs are not mixed up).
Springs behind plugs are NOT interchangeable and must always be installed in the same location!
Plugs are correctly installed when the outer plastic lugs are in the vertical position.