GTI L4-1.8L Turbo (AWP) (2003)
Hood Latch: Service and Repair
Hood Lock, Removing and Installing
Hood Lock, Removing And Installing
-
Remove radiator grille
-
Remove bumper.
Lock support, removing
-
Remove 5 bolts - arrows -.
-
Remove lock support - 1 - from lock carrier - 2 -.
Hood lock, removing
-
Pull hood lock - 1 - slightly toward front. Using a screwdriver - 3 -, unclip Bowden cable - 2 - from lock in direction of arrow -.
-
Disconnect connector from micro-switch.
Installation is performed in reverse order of removal.