GTI L4-1.8L Turbo (AWP) (2003)
-
VAG 1331 Torque wrench or equivalent
-
VAG 1332 Torque wrench or equivalent
-
VAG 1410 Torque wrench or equivalent
-
VAG 1869/2 Brake pedal depressor or equivalent
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
To draw off brake fluid from the reservoir, use brake filler and bleeder unit VAS 5234.
^
Install brake pedal depressor VAG 1869/2 before removing a brake caliper or disconnecting a brake hose from the brake caliper.
1. Phillips-head screw, 4 Nm (35 inch lbs.)
2. Brake disc
-
Thickness 9 mm (0.354 inch)
-
Wear limit 7 mm (0.276 inch)
-
When worn, always replace both sides on an axle.
3. Cap
-
Pressing off and driving in
4. Self-locking 12-point nut, 175 Nm (129 ft. lbs.)
-
Replace each time after removing
5. Wheel hub with wheel bearing and rotor
-
Replace each time after removing
-
Only replace complete
-
Removing and installing
6. Hex bolt, 60 Nm (44 ft. lbs.)
-
With dished spring washer
7. Splash plate
8. Stub axle
9. Parking brake cable
-
Adjusting parking brake
10. Axle beam