GTI L4-1.8L Turbo (AWP) (2003)
Camshaft Position Sensor: Testing and Inspection
Camshaft Position Sensor, checking
Special tools and equipment
-
VAG1598/31 test box
-
VAG1526 hand multimeter or VAG1715 multimeter
-
VAG1594 adapter set
-
Wiring diagram
Check conditions
-
Camshaft Position (CMP) sensor 2 -G163- screwed on tight
-
The battery voltage must be at least 11.5 V.
Test sequence
-
Pull 3 pin connector -1- off Camshaft Position (CMP) sensor 2 -G163- -2-.
-
Connect multimeter to measure voltage using aux. cables from VAG1594 to the outer contacts of the connector.
-
Switch ignition on.
Specification: min. 4.5 V
-
Switch ignition off.
-
Connect VAG1598/31 test box to control module wiring harness. The engine control module remains disconnected.