GTI L4-1.8L Turbo (AWP) (2003)
-
Pull operating lever -1- in direction of -arrow-.
-
Using a screwdriver, tension spring -2- secured to door lock in direction of -arrow- and engage lock lever into spring.
NOTE: Lock is secured by engaging operating lever. Thereby later incorrect clipping-in of Bowden cable is prevented.
-
Insert carrier assembly into door.
-
Tighten all bolts. Tighten bolts marked -1- and -2- in specified sequence.
Tightening torque: 8 Nm
-
Remaining bolts can be tightened in any sequence.
-
Insert door window -3- through window recess without additional force into clamping brackets and align at rear window guide -arrow-.