GTI L4-2.0L Turbo (BPY) (2007)
-
Remove bolts - 5 -.
-
Remove bolts - 4 - from below.
-
Unscrew bolts - 3 - and - 2 - (pointing upward) in area of left and right wheelhousing liners.
A second technician is required for the rest of the removal procedure.
-
With a second technician, pull cover - 1 - parallel out of guide profiles.
-
Disconnect harness connectors of installed electrical components and hoses.
Installing
Installation is performed in the reverse order of removal.
-
Make sure gaps are parallel and pay attention to gap dimensions.