GTI L4-2.0L Turbo (BPY) (2007)
-
Attach window regulator motor - 3 - and connect harness connector - 1 -.
-
Pull door window lightly up and down so that splines are located better between motor and cable drum.
-
Tighten bolts - 2 - for window regulator motor.
-
Screw torque specification - 2 - 3.5 Nm
-
Drive the window regulator up and down to the limit stops, twice. By doing this, window regulator motor is normed and ready for operation and
activates pinch protection.
Then, continue in reverse order of removal.