GTI L4-2.0L Turbo (BPY) (2007)
-
If mounting of cup holder is only slightly bent, as shown (circle), cup holder will still operate. In this case cup holder can be repaired.
-
If mounting of cup holder is severely bent, as shown (circle), replace cup holder.
Production Solution
No production change required.
Service
Repair or Replace Cup Holder
Tip: Under most circumstances the cup holder can be repaired. Replace cup holder only if components are severely damaged or deformed, see
Inspect Components above.
Repair instructions:
Disassemble Cup Holder
-
Remove cup holder from vehicle, see Repair Manual Group 68, Interior Equipment, in ElsaWeb.
-
Slide cover fascia off of cup holder assembly.