volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Headliner, Removing and Installing|Page 13696 > < Interior - Headliner/Grab Handle/Sun Visor Installation|Page 13693
Page 1
background image

Headliner: Service and Repair
Headliner, Removing and Installing

Headliner, Removing And Installing 

Removing 

-

If present, open sunroof.

-

Switch off ignition.

-

Remove lights and switch in molded headliner.

-

Remove roof end strip.

-

Remove upper right A-pillar trim.

-

Remove upper B-pillar trim. Belt anchors or front belt anchor rails do not have to be removed.

2-door only 

-

Remove seat bench.

-

Remove backrest.

-

Remove side trim.

-

Remove luggage compartment cover side compartment.

-

Remove C-pillar trim.

4-door only 

-

Remove airbag emblems - 1 - from both C-pillar trims and remove bolts from each - 2 - (4 Nm).

NOTE:  When re-installing, airbag emblems - 1 - must be replaced.

-

Remove nuts - 3 - from each (1.5 Nm).

-

Loosen trim from nut threaded pins - 3 - - arrow A -.

-

Remove trim from mounts - arrow B - and door seal molding.

NOTE:  Completely removing C-pillar trim is not necessary on 4-door vehicles.

Vehicles with sunroof 

-

Push the wedge T10039/1 between frame - 1 - and headliner - 2 -.

Headliner, Removing and Installing|Page 13696 > < Interior - Headliner/Grab Handle/Sun Visor Installation|Page 13693