GTI L4-2.0L Turbo (BPY) (2007)
Trim Panel: Service and Repair
B-Pillar
Upper B-Pillar Trim, Removing and Installing
Upper B-pillar Trim, Removing And Installing
NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Remove airbag emblem - 1 - and remove screw - 2 - (4 Nm).
NOTE: When re-installing, airbag emblem - 1 - must be replaced.
-
Pull trim in lower area out of mounts in body - arrow A -.
-
Remove trim from door seal tubing.
-
Pull trim out of top mount - arrow B -.