GTI L4-2.0L Turbo (BPY) (2007)
Lower B-Pillar Trim, Removing and Installing
Lower B-pillar Trim, Removing And Installing
NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
In vehicles with interior monitoring system, switch ignition off.
-
Remove upper B-pillar trim. Belt anchor or belt anchor rail do not need to be removed from front seat belt.
-
Remove the two bolts - 1 - (4 Nm).
-
Remove trim - 3 - from door seal tubing.
-
Remove trim from mounts in body in area of guide - 2 -.
-
In vehicles with interior monitoring system, disconnect wiring harness from sensor.