GTI L4-2.0L Turbo (BPY) (2007)
/Page-1444005.png)
1. Phillips/Torx screw, 4 Nm
2. Brake disc
^
Internally vented, dia. 288 mm
^
Thickness 25 mm
^
Wear limit: 22 mm
^
Must always be replaced together on both sides of axle
^
Remove brake caliper before removing
3. Brake pads
^
Thickness 14 mm without backing plate
^
With wear indicator
^
When wear limit is reached (limit: approximately 4 mm), the warning lamp lights up in instrument cluster
^
Wear limit: 2 mm without backing plate
^
Checking thickness Repair Manual, Maintenance
^
Must always be replaced together on both sides of axle
4. Retaining spring
^
Insert in both holes of brake caliper
5. Brake carrier
^
Bolt to wheel bearing housing
6. Brake caliper
^
Do not remove brake hose when replacing brake pad
7. Guide pins, 30 Nm (18 ft lb)
8. Concealment cap
^
Remove
9. Brake hose with banjo fitting and union bolt, 35 Nm
10. Ribbed bolt, 190 Nm
