GTI L4-2.0L Turbo (BPY) (2007)
Parking Brake Cable: Service and Repair
Parking brake cable, removing and installing
Parking brake cable, removing
-
Release parking brake.
-
Remove center console.
-
Loosen adjustment nut - 1 - far enough until respective parking brake cable - 2 - can be disengaged from compensator bracket - 3 -.
-
Pry off spring clip - 1 -.
-
Press lever on brake caliper - 2 - in direction of - arrow - and disengage brake cable - 3 -.
-
Remove Torx bolt - 1 - and then loosen mounting clip from parking brake cable - 2 -.