volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Engine - MIL ON/DTC's P0301/P0302/P0303/P0304|Page 4064 > < Engine - MIL ON/DTC's P0301/P0302/P0303/P0304|Page 4062
Page 1
background image

Compression Check: By Symptom

Technical Service Bulletin # 0108-04

Date: 080123

Engine - MIL ON/DTC's P0301/P0302/P0303/P0304

01 08 04

January 23, 2008

2017063

Affected Vehicles 

Condition

MIL ON, Misfire DTC P0301, P0302, P0303 or P0304 Stored in ECM fault Memory after Cold Start

At times engine may run slightly rough for a few seconds after cold start. MIL may illuminate with a DTC for misfire on one cylinder only (P0301,
P0302, P0303, P0304) stored in the ECM fault memory. Rough running condition disappears a few seconds after cold start and DOES NOT exist with a
warm engine.

Technical Background

Not applicable.

Production Solution

Not applicable.

Service

1.

Follow normal Guided Fault Finding Diagnosis, for example:

^

Swap spark plugs and ignition coils between affected cylinder(s) and good cylinder(s).

^

Check compression and leak-down of affected cylinder(s).

^

Verify fuel quality. (Also refer to Technical Bulletin 2014815 - Gasoline Quality.)

^

Swap fuel injectors between affected cylinder(s) and good cylinder(s).

Note:

When swapping fuel injectors, always replace all fuel injector seals.

Engine - MIL ON/DTC's P0301/P0302/P0303/P0304|Page 4064 > < Engine - MIL ON/DTC's P0301/P0302/P0303/P0304|Page 4062