GTI L4-2.0L Turbo (BPY) (2007)
Water Pump: Service and Repair
Coolant pump, removing and installing
Special tools, testers and auxiliary items required
^
Drip tray V.A.G 1306
^
Spring-type clip pliers VAS 5024A
Coolant pump, removing:
CAUTION: Hot steam may escape when opening expansion tank. Wear protective goggles and protective clothing to prevent damage to eyes
and scalding. Cover cap with a rag and open very carefully.
-
Drain coolant.
-
Remove toothed belt.
-
Vehicles with divided toothed belt guard.
-
Vehicles without divided toothed belt guard.
-
Remove mounting bolts - 1 - for coolant pump and remove coolant pump - 2 -.
-
Remove O-ring - 3 -.
Coolant pump, installing:
Installation is in reverse order of removal, note the following:
-
Replace O-ring.
-
Clean or smooth sealing surface for O-ring.