GTI L4-2.0L Turbo (BPY) (2007)
Discharge Air Temperature Sensor / Switch: Service and Repair
Right Footwell Vent Temperature Sensor G262, Removing and Installing
Right Footwell Vent Temperature Sensor G262, Removing And Installing
Removing:
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
NOTE: Right Footwell Vent Temperature Sensor G262 is depicted with instrument panel removed. It is not necessary to remove instrument panel.
-
Remove glove compartment
-
Disconnect electrical connection at sensor -1-.
-
Rotate sensor -1- 90 degrees and remove from housing.
Installing:
Install in reverse order of removal.